YG(H) gravel pump

Material: High chromium alloy or wear-resistant alloy steel

Scope of application:

Caliber: 100-800mm.

Flow: 80-10000m3/h,

Head: 5-90m.

Product overview

YG/YGH gravel pump is an imported technical product. The pump adopts a single pump shell structure connected by clamps, which is a single-stage single-suction cantilever centrifugal pump. It has the advantages of light weight, good cavitation performance, strong abrasion resistance, wide passage, easy installation and use, and can continuously transport large particles of strongly abrasive mud and sand.

Application scope

This series of gravel pumps are mainly used for continuous transportation of strong abrasive material slurry which can not be conveyed by general slurry pumps, such as dredging by dredgers, sand dredging by dredgers, dredging rivers, mining and metal smelting explosive slag conveying, etc.

product mix

Gold or wear-resistant alloy steel, hardness not less than 58HRC.

Sealing form

Packing seal, auxiliary impeller seal, packing and auxiliary impeller seal, mechanical seal, etc.

Pump transmission

V-belt drive, elastic coupling drive, gear reducer drive, hydraulic coupling drive, frequency conversion drive device, thyristor speed regulation, etc. Various speeds and variants are adopted to make the pump operate under the optimum operating conditions. It has long service life and high operation efficiency, and can meet many kinds of harsh conveying conditions.